Continued re-installing various systems and components:
-- Clamped the plastic anti-chafe covers into position where the cables exit the fuselage at the tail.
-- Riveted the aileron trim servo tray into the fuselage.
-- Installed the rudder cable forward attach clevises to the firewall.
-- Continued planning the routing of wiring harnesses forward and aft through the bulkheads.
-- Prepped lower longerons for installation of the flap actuator arm and attach blocks.
-- Attached fuel selector to its attach plate.
-- Shot a second coat of paint on various small components.
-- Finally, I pulled out and organized all the various bags of hardware that will be needed as the interior goes back together (Photo 3).